Inflatable Plastic Equipment
Types of pneumatic plastic injection machines have different equipment, 10 types of pneumatic plastic injection machine equipment are as follows:
Compressor
Proportion valves
Chillers
Mixer machine
Milling machine
Electric motors
Parison control
Conveyor belt
Dehumidifiers or dryers
Leakage tester device
1. Compressor
Compressor is one of the most essential and important equipments of inflatable plastic device. In fact, the compressor, like a controller, has significant effects on the productivity of most processes. Then, by adjusting it based on the needs of the group, it is possible to help maintain quality, time and energy to a great extent. Considering the fluctuations of the electric current in the use of the pneumatic plastic injection machine, it is possible damages to this production line and will cause a lot of financial losses. By absorbing these fluctuations and keeping the energy constant, the compressor can prevent damage to the parts to a large extent. slow.
1. Failure valves
Proportional valve or proportional valve, which by changing the pressure of the output flow in proportion to the input flow, has many effects on the balance of this system. For example, if the input flow is quadrupled, the output flow will increase by the same amount. The use of this tool has many effects on the flow control in the system. It is available in different models of direction control, flow control and pressure control.
1. Chillers
Chillers are available in different models in the market. This type of equipment can be used depending on the manufacturer's needs. Chillers are used for cooling processes, which ultimately increase the quality of the molded products. Due to this equipment, the air molding machine shortens the molding cycle and greatly increases its use.
< /p>
1. Masterbatch Mixer
Dosing is called masterbatch or material combination device. In injection molding, by rotating the machine, a calibrated dose and shot size of the molding machine and the required amount of additive are introduced through a spiral. The rotor enters the gravity flow of other materials, this is done through the masterbatch mixing device.
1. Mill
There is a lot of waste in plastic injection industries. By using the grinding machine, plastic waste can be recycled and reused. Due to the flexibility of polymer materials in the grinding machine, it can be reused. The important thing about plastic waste is that it must be clean. Because the presence of pollution can have a great impact on the quality of products.
1. Electromotors
Another equipment of inflatable plastic machine is electric motors. This type of device will reduce energy consumption and then have a higher performance. In the electric device, there is no hydraulic system for movement. Therefore, with the presence of electric motors, the necessary movements can be performed. Before paying attention to the type of equipment, you should pay attention to the built device and its hydraulic system. Sometimes there is a possibility that the device will have an external system.
1. Control Parizon
Parison control is another type of auxiliary equipment of pneumatic plastic injection machine. The main task of Parison control is to adjust the thickness of different cold parts. The way this part works is that the signals received through LVDT are adjusted with the thickness value. Then it is issued as a command to the hydraulic valve through the device panel. According to the plans made in the thickness board of the PID controller, different parts of the serum packages are controlled.
1. Conveyor
Other types of auxiliary equipment are pneumatic plastic injection machines, conveyors or conveyors. This device is used to transport products. The advantages of using a conveyor belt are that it does not require manpower, devices such as forklifts, etc. has completely eliminated and reduced additional costs. With the help of the conveyor belt, there is no need to lift heavy products anymore and it is possible to prevent damage to workers and products during the transportation of materials.
1. Humidifier or dryers
Other types of auxiliary equipment of pneumatic plastic injection machine are dehumidifiers or dryers. This device in different models has caused the loss of moisture from the surface of raw materials and prepares it for the process. Among the existing dehumidifiers, the funnel model is a very good option for removing moisture in this device.
1. Leak tester
Leak Tester or leakage tester device will help us in testing and proper performance of standard and high quality products by using some tests such as vacuum decay, helium leak, pressure decay, etc.
The leak tester examines other gaps created in production parts and will guarantee its safety.
Other Equipment of Inflatable Plastic Injection Machine
According to the types of auxiliary equipment of the pneumatic plastic injection machine, other items can be mentioned such as:
Mardon cylinder
PLC
Industrial conveyor belt
All types of motors such as servo motors
The gearbox of the pneumatic plastic device
Pneumatic plastic machine hydraulic valves
Masterbatch mixer
Hydraulic pump for pneumatic injection machines
PLC
Parison controls the inflatable plastic device
Types of air injection device chillers
Electrical panel of inflatable plastic device
Types of electric motors for pneumatic and injection machines
Screw compressors for pneumatic plastic devices
Leakage tester and leak detector of injection pneumatic device
Kelgi or die head plastic inflatable machine
Types of mills, inflatable plastic devices and plastic injection
Clips or clamping of all kinds of plastic injection and inflatable plastic devices
Types of automatic dusters and throwers of inflatable plastic devices
Shredder, material remover, dehumidifier, degasser
